Water Sanitation and Hygiene - Igerera B - Namutumba

Visit by Alex Walyomu on 2019-11-02

Report ID
7323
Created by
Alex Walyomu
Created date
2019-11-05 09:31:00 UTC
Modified by
Alex Walyomu
Modified date
2019-11-05 10:11:04 UTC
Trip Time
07:19-18:56 (11 h 37 m)
Village Time
09:44-16:31 (6 h 47 m)
Travel Time
4 h 50 m

Water Community Meeting

Meeting Topic
test pump and casting 
How Many Men Attended
22 
How Many Women Attended
37 
Staff Attendees
Walyomu Alex 
Government Attendess
LC1 
Visitor Attendees
 
Total Attendance
59 
Look Up
 
Notes
On 3/11/2019 and 4/11/2019, Alex was in Igerera B to supervise the pump testing process and casting. This was a very successful process because this well has a lot of water. The static water level was at 9.50M and dynamic water level was 10.09M. This means that only 0.59M of water was blown out after three hours of water blowing. It means that this well has a capacity to pump out 50,000L/HR clearly fit for commercial pumping. This in future can be turned into a commercial well to supply water to many people around the village. It was then left to settle after to recover the water that had been pumped out and with in 40 Minutes the well had recovered up to 96.6%. This is a very big success and the water cleared very well. The village is very happy that soon they hope to start using their new well. Also the casting process went on well and platform casting was completed. The well will soon be installed with pipes after drying of the platform. The village will need to contribute the materials for the construction of the wall fence around this new well. Alex will go back for training of the water committee and preparing the village for the remaking steps in borehole construction. 
Next Visit
2019-11-13 - Purpose: Village water meeting and training of the water user committee
Program Success
Program Critical Needs
Program Ownership
Other Program Observations
Program Expected Of Village
Program Staff Preparations Next Visit
 

Report Photos

9486 Setting up the mold and pump testing process to determine the water recovery.
9489 Calculation of the percentage rate of water recovery after 3 hours of blowing
9492 Mold set up ready for platform casting
9495 The children fetching water during the pump testing process